Motor Protection Electronics, Inc.
2464 Vulcan Rd.
Apopka, FL 32703
Phone: 407-299-3825 • Fax: 407-294-9435
Email: info@mpelectronics.com • Website: www.mpelectronics.com
All Categories > Duplex/Triplex Alternators > Alternators > Item # 008-120-12S  


Item # 008-120-12S, 120 Volt (V) Alternating Current (AC) Operating Voltage Alternator
List Price $130.07

Small Case Version
The 008-120-12 series of alternators were designed for automatic duplex control of motors or other types of loads. They are available in a single phase voltage of 120 VAC. When power is applied to the alternator, the DPDT output relay contacts change state each time the control voltage is disconnected. (The relay contacts are NOT cross wired in this series of alternators.) The "S" Version has the option of a lead/lag/automatic selector switch.





Specifications  · Features  · Installation Instruction  · Test Method

Specifications

Options
Lead/Lag Select

Underwriter's Laboratories (UL) File Number
#E101681

Product Type
1 Phase, Plug in Alternator

Alternating Current (AC) Operating Voltage
120 V

Relay and Base Type
DPDT, 11 Pin Round Base

Base Configuration/Relay Type
11 Pin, DPDT

Alternating Current (AC) Supply Voltage
120 V

Supply Phase
Single Phase

Supply Frequency
50/60 Hz

Output Current Rating
10 A

Power Dissipation
< 1 Watt

Case Size
Short

Operating Temperature
-20 to +60 ºC

Storage Temperature
-45 to +85 ºC

Enclosure Material
Lexan

Base Material
Phenolic


Features
  • Solid State Circuitry
  • Surge Protected
  • Replaces Mechanical Types
  • Plug In Base
  • Economical, Easy to Install
  • Lead/Lag/Auto Select Switch Option
  • Push-To-Test Switch Option


Installation Instruction

A single phase AC line and properly rated light bulbs are needed to test any alternator in the M.P.E. product line.

  1. The AC line and light bulbs must be connected to the alternator as shown in the test method diagram above.
  2. When the control switch is operated, the light bulbs will alternate on and off.


Test Method

A single phase AC line and properly rated light bulbs are needed to test any alternator in the M.P.E. product line.

  1. The AC line and light bulbs must be connected to the alternator as shown in the test method diagram above.
  2. When the control switch is operated, the light bulbs will alternate on and off.



Print Back