The Pump Monitoring Relay (PMR1) performs both Motor Over Temperature and Seal Leakage Monitoring in one unit. The PMR1 is powered by 120 VAC, with relay contacts rated for 8 Amps at 120 VAC, and comes in a white case. The PMR1 is dead front mountable so that the dead front door need not be opened to see the status of the Seal Leakage condition and Pump Over-Temperature, as well as power indication, the Auto/Manual reset select switch, the reset pushbutton, and the adjustment potentiometer.
Product Video |
N/A |
Underwriter's Laboratories (UL) File Number |
N/A #E101681 |
Product Type |
N/A Pump Monitor Relay |
Maximum Input Power |
N/A 7.0 V·A |
Alternating Current (AC) Input Voltage |
N/A 120 V |
Input Voltage Tolerance (±) |
N/A 10 % |
Output Rating at 120 Volt Alternating Current (AC) Voltage |
N/A 8A Resistive |
Operating Temperature |
N/A -20 to +65 ºC |
Storage Temperature |
N/A -45 to +85 ºC |
Temperature Sensor Voltage |
N/A 6.6 VDC ±10% |
Leak Sensor Voltage |
N/A 4.7 VAC ±10% |
Enclosure Material |
N/A White Lexan |
Base Material |
N/A Phenolic |
Additional Description |
N/A
The PMR1 applies a low voltage DC signal to the Motor Thermal Sensor to check its status, and uses a low voltage AC signal to measure the resistance between a single (or dual) Leakage Probe(s) and the grounded motor housing, or between two Leakage Probes to check for the Seal Leakage condition. |