407.299.3825 Contact Us
Menu
Request Information
The DUPLEXER (010-120-122P) is a low cost SCADA ready plug-in pump controller designed to perform level control for duplex lift station applications. The level inputs of this dual pump controller can be connected to either four float switches or to a conductance probe. This 2 pump controller provides a 10 second power-up start delay, 5 second lag pump delay, and duplex alternation. LEDs provide power on status, level input status, pump call status, and high level alarm status indication. Pump 1 & 2 call and high level alarm relays are provided. HOA and lead select toggle switches are also provided.
Unit of Measure

Specifications

UL File No.

 N/A #E101681

Operating Voltage (AC)

 N/A 120 V

No. of Outputs

 N/A 2

Supply Phase

 N/A Single Phase

Supply Frequency

 N/A 50/60 Hz

Output Contact Rating

 N/A SPST, 6A

Display Indicator

 N/A LED's

Enclosure Material

 N/A Polycarbonate Plastic

Plug-In Base Material

 N/A Rynite

Operating Temperature

 N/A -20 to +60 ºC

Storage Temperature

 N/A -45 to 85 ºC

Socket

 N/A SD12PC

Serial Port

 N/A D-Sub9 RS232 Connector

Communications Protocol

 N/A MODBUS RTU

Switches

 N/A Alarm Reset/Level Simulation H-O-A (2) Lead-Lag Select

Level Inputs

 N/A Floats or Conductance Level Probe

Indication

 N/A Power On Level Pump On (2) Alarm Latched Alarm

Features

N/A

  • Solid State Circuitry
  • Low Power Inputs
  • Output Indicators
  • Power On Indicator
  • High Level Alarm
  • Surge Protected Outputs
  • Fail Safe Operation
  • Time Delayed Outputs
  • Internal Latching
  • Plug In Base

Additional Description

Additional Description

 N/A The high level status indication latches upon high level, until reset by pressing the reset push-button (the relay does not stay latched). Level simulation is accomplished by pressing and holding the push-button. Releasing the push-button allows the simulated level to return to normal. Connecting the serial port to a SCADA system allows the lift station to be monitored and controlled remotely. By connecting a programming device to the serial port (MPE p/n TSID), a number of settings may be accessed to customize the unit.