407.299.3825 Contact Us
Menu
The Pump Monitoring Relay (PMR1) performs both Motor Over Temperature and Seal Leakage Monitoring in one unit. The PMR1 is powered by 120 VAC, with relay contacts rated for 8 Amps at 120 VAC, and comes in a white case. The PMR1 is deadfront mountable so that the deadfront door need not be opened to see the status of the Seal Leakage condition and Pump Over-Temperature, as well as power indication, the Auto/Manual reset select switch, the reset pushbutton, and the adjustment potentiometer.
Unit of Measure

Specifications

Product Video

N/A

UL File No.

N/A #E101681

Product Type

N/A Pump Monitor Relay

Maximum Input Power

N/A 7.0 V·A

Input Voltage (AC)

N/A 120 V

Input Voltage Tolerance

N/A ± 10%

Output Rating at 120V (AC)

N/A 8A Resistive

Operating Temperature

N/A -20 to +65 ºC

Storage Temperature

N/A -45 to 85 ºC

Temperature Sensor Voltage

N/A 6.6 VDC ±10%

Leak Sensor Voltage

N/A 4.7 VAC ±10%

Enclosure Material

N/A White Lexan

Base Material

N/A Phenolic

Additional Description

Additional Description

N/A The PMR1 applies a low voltage DC signal to the Motor Thermal Sensor to check its status, and uses a low voltage AC signal to measure the resistance between a single (or dual) Leakage Probe(s) and the grounded motor housing, or between two Leakage Probes to check for the Seal Leakage condition.

The PMR1 has two mounting options and comes with an 11 pin reverse socket for deadfront mounting.