The SC2000E Station Controller is a panel mount SCADA ready, Modbus RTU Protocol, pump controller designed to perform level control in a wide range of lift station applications, including Level Pump Down/Pump Up. The SC2000E level controller operates the pumps based on the selected setup values and the wet well level signal. The level input source is menu selectable for either a 4-20 mA pressure transducer, or a conductance probe. The SC2000E alternates the pumps, performs lag pump delays, and provides high and low level alarms. The SC2000E has a variety of control options available in the setup menu that may be used to customize the controller for a specific application. Optional I/O is available for VFD speed control and for additional telemetry inputs. Connecting the RS-232 serial port (or optional Ethernet Port) to a SCADA system allows the lift station to be monitored and controlled remotely. The SC2000E can be configured as either a single speed control or VFD.
The SC2000E Station Controller is a panel mount SCADA ready, Modbus RTU Protocol, pump controller designed to perform level control in a wide range of lift station applications, including Level Pump Down/Pump Up. The SC2000E level controller operates the pumps based on the selected setup values and the wet well level signal. The level input source is menu selectable for either a 4-20 mA pressure transducer, or a conductance probe. The SC2000E alternates the pumps, performs lag pump delays, and provides high and low level alarms. The SC2000E has a variety of control options available in the setup menu that may be used to customize the controller for a specific application. Optional I/O is available for VFD speed control and for additional telemetry inputs. Connecting the RS-232 serial port (or optional Ethernet Port) to a SCADA system allows the lift station to be monitored and controlled remotely. The SC2000E can be configured as either a single speed control or VFD.
Underwriter's Laboratories (UL) File Number
N/A#E101681
Product Type
N/ASC2000, 4 Pump Level Controller
Number of Analog Outputs
N/A0
Number of Auxiliary Analog Inputs
N/A0
N/A1
N/A2
N/A3
N/A4
Maximum Input Power
N/A13.0 V·A
Input Voltage
N/A120 VAC, ± 10%
Input Voltage Tolerance (±)
N/A10 %
Electromagnetic Interference (EMI) Line Filter
N/APie Type
Input Power Transient Protection
N/AMetal Oxide Varistor
Agency Approval
N/ACAN CSA UL 508
Ambient Operating Temperature
N/A-20 to +65 ºC
Level Display
N/A3 Digit, 7 Segment LED
Level Display Range (Decimal Point Position Selectable)
N/A0 to 999 ft
Display Indicator
N/ALED's
Color
N/AWhite with Blue Lettering
Output Relay
N/A6 A
Relay Current at 30 Volt Direct Current (DC) Voltage
Regulated Direct Current (DC) Voltage Tolerance (±)
N/A1 V
Isolated Analog Output Current
N/A4-20 mA, max load 600 ohm, Transient Protected
Maximum Analog Output Load
N/A600 O
Isolated Analog Input Current (Transient Protected)
N/A4-20 mA, 250 ohm Load, Transient Protected
Isolated Auxiliary Analog Input Current (Transient Protected)
N/A4 to 20 mA
Auxiliary Analog Input Load (Transient Protected)
N/A250 O
External Height
N/A6.9 in
External Width
N/A8.5 in
External Depth
N/A4.9 in
Cut Out Height
N/A6.0 in
Cut Out Width
N/A7.5 in
Typical Applications
N/A
Duplex Pump Control
Fixed Speed Control
Pump Down (Empty a Tank)
Pump Up (Fill a Tank)
Quadraplex Pump Control
Simplex Pump Control
Triplex Pump Control
Variable Speed Control
N/A
Duplex Pump Control
Fixed Speed Control
Pump Down (Empty a Tank)
Pump Up (Fill a Tank)
Quadraplex Pump Control
Simplex Pump Control
Triplex Pump Control
Variable Speed Control
N/ADuplex Pump Control Fixed Speed Control Pump Down (Empty a Tank) Pump Up (Fill a Tank) Quadraplex Pump Control Simplex Pump Control Triplex Pump Control Variable Speed Control
N/ADuplex Pump Control Fixed Speed Control Pump Down (Empty a Tank) Pump Up (Fill a Tank) Quadraplex Pump Control Simplex Pump Control Triplex Pump Control Variable Speed Control
N/ADuplex Pump Control Fixed Speed Control Pump Down (Empty a Tank) Pump Up (Fill a Tank) Quadraplex Pump Control Simplex Pump Control Triplex Pump Control Variable Speed Control
Options
N/AAdd "-S" to part number for an Isolated Analog Level Input
Category
N/AControllers
Features
N/A
All Setup Parameter Values May be Viewed or Changed From the Front of Unit
120 VAC input power
Level Input Source - Menu Selectable
Analog Level Input (4-20 mA)
Level Probe (Conductance Probe with 10 Inputs)
20 VDC Power for Analog Level Input Loop
6 Amp Relay Outputs for: Pump Call, High Level, and Low Level Alarms
RS-232 Serial Port, Modbus RTU Protocol
Alternation Modes - Menu Selectable
Standard Alternation
Pump 1 Always Lead - Stays On with Other Pumps
Pump 1 Always Lead - Turns Off with Other Pumps On
Split Alternation - Pumps 1 & 2, and Pumps 3 & 4
Fixed Sequence - Pump 1 Always Leads
Stepped On/Off - Only One Pump Runs at a Time
Alternation - First On - Last Off or First On - First Off
Alternator Logic Skips Disabled Pumps
Remembers Lead Pump Position During Power Outage
Timed [1 minute] Level Simulation
Security Code Protected Parameter Setup
18 Discrete Inputs that can be Programmed for the Following Functions :
Pump Disable with HOA in OFF, or Pump Fault
External Alternator Selector Switch
All Pump Disable - for Connection to Phase Monitor
Limit Number of Pumps Called While on Emergency Power
Alternation by External Time Clock
Freeze Wet Well Level During Bubbler Tube Purge
Call Pump Last - for Connection to VFD/Bypass Logic
Float Switch Backup
A Variety of Telemetry Functions
Status of Discrete Inputs May Be Viewed From Front of Controller
Plug In style Connectors
Wetwell Flush Cycle Feature to reduce sludge build-up within the wetwell
Flow Calculator Feature for latest Inflow Rate, Average Daily Flow, and Pump Outflow Rate
Unused Output Relays programmable via SCADA for additional control uses
N/A
All Setup Parameter Values May be Viewed or Changed From the Front of Unit
120 VAC input power
Level Input Source - Menu Selectable
Analog Level Input (4-20 mA)
Level Probe (Conductance Probe with 10 Inputs)
20 VDC Power for Analog Level Input Loop
6 Amp Relay Outputs for: Pump Call, High Level, and Low Level Alarms
RS-232 Serial Port, Modbus RTU Protocol
Alternation Modes - Menu Selectable
Standard Alternation
Pump 1 Always Lead - Stays On with Other Pumps
Pump 1 Always Lead - Turns Off with Other Pumps On
Split Alternation - Pumps 1 & 2, and Pumps 3 & 4
Fixed Sequence - Pump 1 Always Leads
Stepped On/Off - Only One Pump Runs at a Time
Alternation - First On - Last Off or First On - First Off
Alternator Logic Skips Disabled Pumps
Remembers Lead Pump Position During Power Outage
Timed [1 minute] Level Simulation
Security Code Protected Parameter Setup
18 Discrete Inputs that can be Programmed for the Following Functions :
Pump Disable with HOA in OFF, or Pump Fault
External Alternator Selector Switch
All Pump Disable - for Connection to Phase Monitor
Limit Number of Pumps Called While on Emergency Power
Alternation by External Time Clock
Freeze Wet Well Level During Bubbler Tube Purge
Call Pump Last - for Connection to VFD/Bypass Logic
Float Switch Backup
A Variety of Telemetry Functions
Status of Discrete Inputs May Be Viewed From Front of Controller
Plug In style Connectors
Wetwell Flush Cycle Feature to reduce sludge build-up within the wetwell
Flow Calculator Feature for latest Inflow Rate, Average Daily Flow, and Pump Outflow Rate
Unused Output Relays programmable via SCADA for additional control uses
N/A
All Setup Parameter Values May be Viewed or Changed From the Front of Unit
120 VAC input power
Level Input Source - Menu Selectable
Analog Level Input (4-20 mA)
Level Probe (Conductance Probe with 10 Inputs)
20 VDC Power for Analog Level Input Loop
6 Amp Relay Outputs for: Pump Call, High Level, and Low Level Alarms
RS-232 Serial Port, Modbus RTU Protocol
Alternation Modes - Menu Selectable
Standard Alternation
Pump 1 Always Lead - Stays On with Other Pumps
Pump 1 Always Lead - Turns Off with Other Pumps On
Split Alternation - Pumps 1 & 2, and Pumps 3 & 4
Fixed Sequence - Pump 1 Always Leads
Stepped On/Off - Only One Pump Runs at a Time
Alternation - First On - Last Off or First On - First Off
Alternator Logic Skips Disabled Pumps
Remembers Lead Pump Position During Power Outage
Timed [1 minute] Level Simulation
Security Code Protected Parameter Setup
18 Discrete Inputs that can be Programmed for the Following Functions :
Pump Disable with HOA in OFF, or Pump Fault
External Alternator Selector Switch
All Pump Disable - for Connection to Phase Monitor
Limit Number of Pumps Called While on Emergency Power
Alternation by External Time Clock
Freeze Wet Well Level During Bubbler Tube Purge
Call Pump Last - for Connection to VFD/Bypass Logic
Float Switch Backup
A Variety of Telemetry Functions
Status of Discrete Inputs May Be Viewed From Front of Controller
Plug In style Connectors
Wetwell Flush Cycle Feature to reduce sludge build-up within the wetwell
Flow Calculator Feature for latest Inflow Rate, Average Daily Flow, and Pump Outflow Rate
Unused Output Relays programmable via SCADA for additional control uses
N/A
All Setup Parameter Values May be Viewed or Changed From the Front of Unit
120 VAC input power
Level Input Source - Menu Selectable
Analog Level Input (4-20 mA)
Level Probe (Conductance Probe with 10 Inputs)
20 VDC Power for Analog Level Input Loop
6 Amp Relay Outputs for: Pump Call, High Level, and Low Level Alarms
RS-232 Serial Port, Modbus RTU Protocol
Alternation Modes - Menu Selectable
Standard Alternation
Pump 1 Always Lead - Stays On with Other Pumps
Pump 1 Always Lead - Turns Off with Other Pumps On
Split Alternation - Pumps 1 & 2, and Pumps 3 & 4
Fixed Sequence - Pump 1 Always Leads
Stepped On/Off - Only One Pump Runs at a Time
Alternation - First On - Last Off or First On - First Off
Alternator Logic Skips Disabled Pumps
Remembers Lead Pump Position During Power Outage
Timed [1 minute] Level Simulation
Security Code Protected Parameter Setup
18 Discrete Inputs that can be Programmed for the Following Functions :
Pump Disable with HOA in OFF, or Pump Fault
External Alternator Selector Switch
All Pump Disable - for Connection to Phase Monitor
Limit Number of Pumps Called While on Emergency Power
Alternation by External Time Clock
Freeze Wet Well Level During Bubbler Tube Purge
Call Pump Last - for Connection to VFD/Bypass Logic
Float Switch Backup
A Variety of Telemetry Functions
Status of Discrete Inputs May Be Viewed From Front of Controller
Plug In style Connectors
Wetwell Flush Cycle Feature to reduce sludge build-up within the wetwell
Flow Calculator Feature for latest Inflow Rate, Average Daily Flow, and Pump Outflow Rate
Unused Output Relays programmable via SCADA for additional control uses
N/A
All Setup Parameter Values May be Viewed or Changed From the Front of Unit
120 VAC input power
Level Input Source - Menu Selectable
Analog Level Input (4-20 mA)
Level Probe (Conductance Probe with 10 Inputs)
20 VDC Power for Analog Level Input Loop
6 Amp Relay Outputs for: Pump Call, High Level, and Low Level Alarms
RS-232 Serial Port, Modbus RTU Protocol
Alternation Modes - Menu Selectable
Standard Alternation
Pump 1 Always Lead - Stays On with Other Pumps
Pump 1 Always Lead - Turns Off with Other Pumps On
Split Alternation - Pumps 1 & 2, and Pumps 3 & 4
Fixed Sequence - Pump 1 Always Leads
Stepped On/Off - Only One Pump Runs at a Time
Alternation - First On - Last Off or First On - First Off
Alternator Logic Skips Disabled Pumps
Remembers Lead Pump Position During Power Outage
Timed [1 minute] Level Simulation
Security Code Protected Parameter Setup
18 Discrete Inputs that can be Programmed for the Following Functions :
Pump Disable with HOA in OFF, or Pump Fault
External Alternator Selector Switch
All Pump Disable - for Connection to Phase Monitor
Limit Number of Pumps Called While on Emergency Power
Alternation by External Time Clock
Freeze Wet Well Level During Bubbler Tube Purge
Call Pump Last - for Connection to VFD/Bypass Logic
Float Switch Backup
A Variety of Telemetry Functions
Status of Discrete Inputs May Be Viewed From Front of Controller
Plug In style Connectors
Wetwell Flush Cycle Feature to reduce sludge build-up within the wetwell
Flow Calculator Feature for latest Inflow Rate, Average Daily Flow, and Pump Outflow Rate
Unused Output Relays programmable via SCADA for additional control uses
/Asset/SC2000-Pic-161017.jpg 