The Level Probe Converter senses liquid level and provides a 4 to 20 mA analog output for use by a pump controller or PLC to control liquid level. The unit monitors the ten electrodes on a Level Probe, and provides an analog signal that is proportional to level. All setup is easily done using the four DIP switches on the unit. The Sensitivity of the unit must be set for the type of liquid being detected. The Analog Output Delay setting provides control over how fast the analog output transitions from one level output value to another. It takes 10 times the Analog Output Delay setting value to go from 4 to 20 mA, when the electrodes are covered quickly. When the electrodes are slowly covered one at a time, the Analog Output Delay is used to provide a smooth transition as the level goes from electrode to electrode.
Request Information
Unit of Measure
Items
LPC420 Level Probe Converter

Din Rail Mount Level Probe Converter
Reverse Mount Level Probe Converter

Reverse Mount Level Probe Converter
Supply Voltage N/A 24 VDC
Supply Voltage Tolerance (±) N/A 10 %
Maximum Supply Current N/A N/A 65 mA
Maximum Power Consumption N/A 1.8 Watt N/A
Non-Isolated Analog Output Current (Transient Protected) N/A Non-Isolated, 4-20 mA
Analog Output Maximum Load N/A N/A 600 O
Sensor Output Voltage N/A ± 8 V Square Wave N/A ± 8 V Square Wave at 60 Hz
Sensor Output Current N/A ± 0.8 mA max (per sensor)
Operating Temperature N/A -20 to +65 ºC
Storage Temperature N/A -45 to 85 ºC
Enclosure Material N/A Din Rail Mounted Aluminum N/A Panel Mounted Aluminum
Additional Description N/A N/A The Analog Output Delay setting provides control over how fast the analog output transitions from one level output value to another. It takes 10 times the Analog Output Delay setting value to go from 4 to 20 mA, when the electrodes are covered quickly. When the electrodes are slowly covered one at a time, the Analog Output Delay is used to provide a smooth transition as the level goes from electrode to electrode.
Typical Applications N/A N/A For use with any 10 electrode conductance probe where an analog 4 to 20 mA level signal and a panel mounted level display are required.