Single Phase Relay for Motor Protection.
The Over/Under Voltage Monitor is used to protect single phase equipment that is required to operate between two voltage limits. In a normal voltage environment, the internal relay of the Single Phase Monitor will energize and the LED will illuminate allowing normal operation. Abnormal voltage conditions will cause the internal relay of the Voltage Monitoring Relay to de-energize and the LED to turn off.
Unit of Measure
Specifications
Underwriter's Laboratories (UL) File Number |
N/A #E101681 |
Product Type |
N/A 1 Phase, Plug in Voltage Monitor |
Alternating Current (AC) Operating Voltage |
N/A 230 V |
Relay Type |
N/A DPDT |
Base Terminal Configuration |
N/A Plug in 12 Pin Rectangular |
Socket Type |
N/A 12 Pin Rectangular, SD 12-PC |
Under Voltage Trip |
N/A - 15% of Setting |
Under Voltage Reset |
N/A -12% of Setting |
Over Voltage Trip |
N/A +15% of Setting |
Over Voltage Reset |
N/A +12% of Setting |
Trip Delay |
N/A 5 sec. (Delay is reduced to less than 1 sec if Phase Imbalance is 15% or greater.) |
Reset Delay |
N/A 2 sec. (Standard) |
Voltage Ranges |
N/A 200 to 240 V |
Output Rating at 240 Volt Alternating Current (AC) Voltage |
N/A 6A Inductive 10A Resistive |
Operating Temperature |
N/A -40 to +50 ºC |
Storage Temperature |
N/A -45 to 85 ºC |
Enclosure Material |
N/A White Lexan |
Base Material |
N/A Phenolic |
Protects Against |
N/A Under Voltage |
Category |
N/A Voltage Monitors |
