The Simplexer Controller (010-120-121P) is a plug-in controller for single pump control operation. The controller’s inputs shall be designed to accept either float switches or a conductance level probe input. The Simplexer Controller shall be UL508 Listed, SCADA ready, with modbus protocol, and be able to perform either pump-up or pump down control.
The DUPLEXER (010-120-122P) is a low cost SCADA ready, Modbus RTU Protocol plug-in pump controller designed to perform level control for duplex lift station applications. The level inputs of this dual pump controller can be connected to either four float switches or to a conductance probe. This 2 pump controller provides a 10 second power-up start delay, 5 second lag pump delay, and duplex alternation. LEDs provide power on status, level input status, pump call status, and high level alarm status indication. Pump 1 & 2 call and high level alarm relays are provided. HOA and lead select toggle switches are also provided.
The Intrinsically Safe Duplexer (ISD-P, ISD-D, or ISD-S) is a UL913 low cost SCADA ready intrinsically safe pump controller designed to perform level control for duplex lift station applications.
The I.S. Float Input Controller comes in one of three options: Surface Mount, Din Rail Mount, or Panel Mount. The I.S. Level Probe Input Controller comes standard with a serial port and has an optional Ethernet port.
The controller's level inputs may be connected to either five float switches, five single point conductance probes, or five selected points on a ten point conductance probe.
The level inputs are intrinsically safe and allow maintenance personnel to safely handle the float switches or conductance probes while ...
The SC100 controller is a low cost, simple to use simplex or duplex controller for lift station liquid level control. It operates the pumps based on the selected setup parameter values and the 4-20 mA wet well level input signal. The controller has relays for two pump call outputs, and for high and low level alarms outputs. A regulated 24 VDC power supply is provided for powering the pressure transducer circuit. A four digit seven segment red LED display is provided for parameter setup and level display. Red LED’s are provided for pump 1 and 2 call and for high and low level alarm indication. Alternation of the pumps is provided, and a fixed 1-2 or 2-1 sequence may also be selected through the menu. The controller can be setup to ...
The SC1000E Station Controller is a UL 508 panel mount SCADA ready, Modbus RTU Protocol, pump station controller designed to perform level control in a wide range of lift station applications, including Level Pump Down/Pump Up. The SC1000E level controller operates the pumps based on selected setup values and the wet well level signal. The source of the level input signal is menu selectable as either a 4-20 mA transducer or a 10 point conductance probe. The SC1000E alternates the pumps, performs lag pump delays, provides high and low alarms, and has a variety control options available in the setup menu to customize the controller to the application. Connecting the RS-232 serial port (or optional Ethernet Port) to a SCADA system allows ...
The SC2000E Station Controller is a panel mount SCADA ready, Modbus RTU Protocol, pump controller designed to perform level control in a wide range of lift station applications, including Level Pump Down/Pump Up. The SC2000E level controller operates the pumps based on the selected setup values and the wet well level signal. The level input source is menu selectable for either a 4-20 mA pressure transducer, or a conductance probe. The SC2000E alternates the pumps, performs lag pump delays, and provides high and low level alarms. The SC2000E has a variety of control options available in the setup menu that may be used to customize the controller for a specific application. Optional I/O is available for VFD speed control and for ...
