The Intrinsically Safe Duplexer (ISD-P, ISD-D, or ISD-S) is a UL913 low cost SCADA ready intrinsically safe pump controller designed to perform level control for duplex lift station applications.
The I.S. Float Input Controller comes in one of three options: Surface Mount, Din Rail Mount, or Panel Mount. The I.S. Level Probe Input Controller comes standard with a serial port and has an optional Ethernet port.
The controller's level inputs may be connected to either five float switches, five single point conductance probes, or five selected points on a ten point conductance probe.
The level inputs are intrinsically safe and allow maintenance personnel to safely handle the float switches or conductance probes while ...
The Intrinsically Safe Relay ISR provides a safe and reliable method of load control when interfaced with a contact closure in a hazardous location. When the control switch input is closed between pins 1 and 8, the output relay becomes energized, and the LED is illuminated. When the control switch input is open, the output relay is de-energized, and the LED is turned off. This IS Relay is UL913 and provides intrinsically safe circuits for use in Class I, Groups A, B, C, D Class II, Groups E, F, G and Class III - Hazardous Locations. The socket is included with the Intrinsically Safe Float Relay.
The ISB10 provides a UL913 intrinsically safe barrier between a 10 channel conductance probe in a hazardous location and pump controls in a non-hazardous area. The Level Probe Barrier is designed to allow the level sense signal (±12 V square wave) from the pump control device to pass through unchanged. If an accident or malfunction occurs in the control panel that would potentially connect spark-inducing energy to the probe wiring in the wet well, the IS Barrier clamps to limit the voltage and current to a safe level. The 10 Channel Probe Barrier has a fuse in each channel that is capable of disconnecting the barrier from a high energy source that may be present in the control panel.
