Item # LPR-1, Level Probe Relays On Motor Protection Electronics (MPE)

Our ProductsPhase Monitors Voltage MonitorsDuplex / Triplex AlternatorsOnsite ProductsTime Delay RelaysIntrinsically Safe
ControlsControllers Level Measurement Special Controls Hardware

Registered Users – Sign In


	If you don't find what you are looking for, please call MPE at 407-299-3825.


Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Level Measurement > Item # LPR-1


	Item # LPR-1, Level Probe Relays

larger image

The Level Probe Relay (LPR-1) senses liquid level and provides a relay output for controlling a pump or level alarm. The unit is a, DPDT, 12 pin plug-in, has two inputs, an ON and an OFF, for connection to two electrodes of a conductance probe. All setup is easily done using the DIP switches on the unit.

When used for a level alarm the ON and OFF inputs may be connected to the same electrode on the probe, or the ON input may be used by itself. When used for pump control the ON and OFF inputs are typically connected to two different level probe electrodes to provide a latching function.

Specifications · Additional Description

Specifications

Underwriter's Laboratories (UL) File Number		#E101681

Alternating Current (AC) Supply Voltage		120 V

Supply Voltage Tolerance (±)		10 %

Supply Phase		Single Phase

Supply Frequency		50/60 Hz

Max. Power Consumption		3.8 V·A

Relay Type		DPDT

Sensor Output Voltage		± 12 V Square Wave

Sensor Output Current		± 1.2 mA max (per sensor)

Operating Temperature		-40 to +60 ºC

Storage Temperature		-45 to 85 ºC

Enclosure Material		Poly Carbonate

Base Material		Phenolic

Plug-In Socket		SD12-PC

Additional Description

The Conductance Relay has two pump control modes, Pump Down (empty a tank) and Pump Up (fill a tank). When in the Pump Down mode and both inputs detect liquid, the unit energizes the relay and keeps it energized until the level drops to the point where the OFF input no longer detects liquid. When in the Pump Up mode and both inputs detect no liquid, the unit energizes the relay and keeps it energized until the level rises to where the OFF input detects liquid.

The Sensitivity of the unit must be set for the type of liquid being detected (see the Dip Switch table). The unit provides a 10 second power up delay to prevent a pump from being turned on too soon after a power interruption. An adjustable ON Delay is provided for use as a lag pump delay. The adjustable OFF Delay is provided so that the unit may be used to provide timed off, backup pump control. (See the Dip Switch table for ON and OFF delay settings.)

MORE IMAGES


	· LPR Dip Switch Info

	· LPR Pinout Info

	· LPR Base Dimensions

	· LPR Case Dimensions

DOWNLOADS


		Product Data-Sheets - Level Probe Relays (PDF, 694KB)

		MPE-LPR Level Probe Relays Specification (PDF, 9KB)

Item # LPR-1, Level Probe Relays

Underwriter's Laboratories (UL) File Number

Alternating Current (AC) Supply Voltage

Supply Voltage Tolerance (±)

Supply Phase

Supply Frequency

Max. Power Consumption

Relay Type

Sensor Output Voltage

Sensor Output Current

Operating Temperature

Storage Temperature

Enclosure Material

Base Material

Plug-In Socket