Item # 008-120-10, 120 Volt (V) Alternating Current (AC) Operating Voltage Alternator On Motor Protection Electronics (MPE)

Our ProductsPhase Monitors Voltage MonitorsDuplex / Triplex AlternatorsOnsite ProductsTime Delay RelaysIntrinsically Safe
ControlsControllers Level Measurement Special Controls Hardware


	If you don't find what you are looking for, please call MPE at 407-299-3825.


Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Duplex/Triplex Alternators > Alternators > Item # 008-120-10


	Item # 008-120-10, 120 Volt (V) Alternating Current (AC) Operating Voltage Alternator
	List Price $118.43

larger image

Small Case Version
The 008-120-10 series of alternators were designed for automatic duplex control of motors or other types of loads. They are available in a single phase voltage of 120 VAC. When power is applied to the alternator, the output relay contacts change state each time the control voltage is disconnected.

Specifications · Features · Installation Instruction · Test Method

Specifications

Options		Standard Unit

Underwriter's Laboratories (UL) File Number		#E101681

Product Type		1 Phase, Plug in Alternator

Alternating Current (AC) Operating Voltage		120 V

Relay and Base Type		SPDT, 8 Pin Octal Base

Base Configuration/Relay Type		8 Pin, SPDT

Alternating Current (AC) Supply Voltage		120 V

Supply Phase		Single Phase

Supply Frequency		50/60 Hz

Output Current Rating		10 A

Power Dissipation		< 1 Watt

Case Size		Short

Operating Temperature		-20 to +60 ºC

Storage Temperature		-45 to +85 ºC

Enclosure Material		Lexan

Base Material		Phenolic

Features

Solid State Circuitry
Surge Protected
Replaces Mechanical Types
Plug In Base
Economical, Easy to Install
Lead/Lag/Auto Select Switch Option
Push-To-Test Switch Option

Installation Instruction

Connect pins 3 and 4 of the alternator to a single phase AC supply as shown in the installation diagram above.
The hot side of the AC voltage is connected to one side of the control switch and to pins 1 and 4 of the alternator. The opposite side of the control switch is connected to pin 5 of the alternator.
One side of each contactor coil is connected to either pin 2 or 8 of the alternator depending upon the user preference for Lead/Lag designation.
The neutral side of the AC supply is connected to pin 3 of the alternator and to the opposite sides of the contactor coils.

Test Method

A single phase AC line and properly rated light bulbs are needed to test any alternator in the M.P.E. product line.

The AC line and light bulbs must be connected to the alternator as shown in the test method diagram above.
When the control switch is operated, the light bulbs will alternate on and off.

MORE IMAGES


	· Alternators (008-120-10) - 2

	· Installation Diagram (Alternators - 008-024-10)

	· Test method Diagram (008-024-10)

DOWNLOADS


		008-120-10 Data Sheet (PDF, 448KB)

		MPE Alternator Specification (008-120-10) (PDF, 60KB)

Item # 008-120-10, 120 Volt (V) Alternating Current (AC) Operating Voltage Alternator

Options

Underwriter's Laboratories (UL) File Number

Product Type

Alternating Current (AC) Operating Voltage

Relay and Base Type

Base Configuration/Relay Type

Alternating Current (AC) Supply Voltage

Supply Phase

Supply Frequency

Output Current Rating

Power Dissipation

Case Size

Operating Temperature

Storage Temperature

Enclosure Material

Base Material