Our ProductsPhase MonitorsVoltage MonitorsDuplex / Triplex AlternatorsOnsite ProductsTime Delay RelaysIntrinsically Safe
ControlsControllersLevel MeasurementSpecial ControlsHardware
If you don't find what you are looking for, please call MPE at 407-299-3825.
View Cart View RFQs Express Ordering
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Duplex/Triplex Alternators > Alternators > Item # 008-120-11S  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Item # 008-120-11S, 120 Volt (V) Alternating Current (AC) Operating Voltage Alternator
List Price $127.56


Small Case Version
The 008-120-11 series of alternators were designed for automatic duplex control of motors and other types of loads. They are available in a single phase voltage of 120 VAC. When power is applied to the alternator, the cross-wired DPDT output relay contacts change state each time the control voltage is disconnected. The "S" Version has the option of a lead/lag/automatic selector switch.




Specifications  · Features  · Installation Instruction  · Test Method

Specifications

Options
Lead/Lag Select

Underwriter's Laboratories (UL) File Number
#E101681

Product Type
1 Phase, Plug in Alternator

Alternating Current (AC) Operating Voltage
120 V

Power on Pins
3
6

Relay and Base Type
DPDT, Cross Wired 8 Pin Octal Base

Base Configuration/Relay Type
8 Pin, DPDT Cross Wired

Alternating Current (AC) Supply Voltage
120 V

Supply Phase
Single Phase

Supply Frequency
50/60 Hz

Output Current Rating
10 A

Power Dissipation
< 1 Watt

Case Size
Short

Operating Temperature
-20 to +60 ºC

Storage Temperature
-45 to +85 ºC

Enclosure Material
Lexan

Base Material
Phenolic


Features
  • Solid State Circuitry
  • Surge Protected
  • Replaces Mechanical Types
  • Plug In Base
  • Economical, Easy to Install
  • Lead/Lag/Auto Select Switch Option
  • Push-To-Test Switch Option


Installation Instruction
  1. Connect pins 3 and 6 of the alternator to a single phase AC supply as shown in the installation diagram above.
  2. The hot side of the AC voltage is connected to one side of each control switch and pin 3 of the alternator. The opposite side of the control switches can be connected to either pin 1 or 2 of the alternator depending upon the user preference for Lead/Lag designation.
  3. One side of each contactor coil is connected to either pin 7 or 8 of the alternator depending upon the Lead/Lag designation determined in step 2. The opposite sides of the contactor coils are both connected to pin 6 of the alternator, the neutral side of the AC supply.


Test Method

A single phase AC line and properly rated light bulbs are needed to test any alternator in the M.P.E. product line.

  1. The AC line and light bulbs must be connected to the alternator as shown in the test method diagram above.
  2. When the control switches are operated, the light bulbs will alternate on and off.


 MORE IMAGES 

·  Alternators (008-120-11) - 2

·  Installation Diagram (Alternators - 008-024-11)

·  Test Method - 1


 DOWNLOADS 

Data Sheet for Alternators (008-120-11)
(PDF, 689KB)

MPE Alternator Specification (008-120-11S)
(PDF, 62KB)


Add To Cart Request Quote
Site created by Thomas Web Solutions and powered by Navigator Platform
Motor Protection Electronics, Inc. | Leaders in Design and Manufacturing for Industrial Controls