Item # SC2000-22E, 2 Analog Output and 2 Auxiliary Analog Input Station Controller On Motor Protection Electronics (MPE)

Our ProductsPhase Monitors Voltage MonitorsDuplex / Triplex AlternatorsOnsite ProductsTime Delay RelaysIntrinsically Safe
ControlsControllers Level Measurement Special Controls Hardware


	If you don't find what you are looking for, please call MPE at 407-299-3825.


Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Controllers > SC2000E Station Controllers > Item # SC2000-22E


	Item # SC2000-22E, 2 Analog Output and 2 Auxiliary Analog Input Station Controller

larger image

The SC2000E Station Controller is a panel mount SCADA ready, Modbus RTU Protocol, pump controller designed to perform level control in a wide range of lift station applications, including Level Pump Down/Pump Up. The SC2000E level controller operates the pumps based on the selected setup values and the wet well level signal. The level input source is menu selectable for either a 4-20 mA pressure transducer, or a conductance probe. The SC2000E alternates the pumps, performs lag pump delays, and provides high and low level alarms. The SC2000E has a variety of control options available in the setup menu that may be used to customize the controller for a specific application. Optional I/O is available for VFD speed control and for additional telemetry inputs. Connecting the RS-232 serial port (or optional Ethernet Port) to a SCADA system allows the lift station to be monitored and controlled remotely. The SC2000E can be configured as either a single speed control or VFD.

Specifications · Typical Applications · Features

Specifications

Underwriter's Laboratories (UL) File Number		#E101681

Product Type		SC2000, 4 Pump Level Controller

Number of Analog Outputs		2

Number of Auxiliary Analog Inputs		2

Maximum Input Power		13.0 V·A

Input Voltage		120 VAC, ± 10%

Input Voltage Tolerance (±)		10 %

Electromagnetic Interference (EMI) Line Filter		Pie Type

Input Power Transient Protection		Metal Oxide Varistor

Agency Approval		CAN CSA UL 508

Ambient Operating Temperature		-20 to +50 ºC

Level Display		5 Digit, 7 Segment LED

Level Display Range (Decimal Point Position Selectable)		0 to 2310 ft

Display Indicator		LED's

Color		White with Blue Lettering

Aux. Analog Inputs		Isolated 4-20 mA, 100 ohm Load, Transient Protected

Discrete Inputs		Optically Isolated and Transient Protected

Power for Discrete Inputs		24 VDC, Unregulated, Transient Protected

Power for Analog Input		20 VDC, ± 1%, Regulated

Regulated Direct Current (DC) Voltage Tolerance (±)		1 V

Isolated Analog Output Current		4-20 mA, max load 900 ohm, Transient Protected

Maximum Analog Output Load		900 O

Isolated Analog Input Current (Transient Protected)		4-20 mA, 100 ohm Load, Transient Protected

Isolated Auxiliary Analog Input Current (Transient Protected)		4 to 20 mA

Auxiliary Analog Input Load (Transient Protected)		100 O

External Height		6.9 in

External Width		8.5 in

External Depth		4.9 in

Cut Out Height		6.0 in

Cut Out Width		7.5 in

Options		Add "-S" to part number for an Isolated Analog Level Input

Category		Controllers

Relay Current at 120 Volt Alternating Current (AC) Voltage		8 A

Typical Applications

Duplex Pump Control

Fixed Speed Control

Pump Down (Empty a Tank)

Pump Up (Fill a Tank)

Quadraplex Pump Control

Simplex Pump Control

Triplex Pump Control

Variable Speed Control

Features

All Setup Parameter Values May be Viewed or Changed From the Front of Unit
120 VAC input power
Level Input Source - Menu Selectable
Analog Level Input (4-20 mA)
Level Probe (Conductance Probe with 10 Inputs)
20 VDC Power for Analog Level Input Loop
6 Amp Relay Outputs for: Pump Call, High Level, and Low Level Alarms
RS-232 Serial Port, Modbus RTU Protocol
Alternation Modes - Menu Selectable

Standard Alternation
Pump 1 Always Lead - Stays On with Other Pumps
Pump 1 Always Lead - Turns Off with Other Pumps On
Split Alternation - Pumps 1 & 2, and Pumps 3 & 4
Fixed Sequence - Pump 1 Always Leads
Stepped On/Off - Only One Pump Runs at a Time

Alternation - First On - Last Off or First On - First Off
Alternator Logic Skips Disabled Pumps
Remembers Lead Pump Position During Power Outage
Timed [1 minute] Level Simulation
Security Code Protected Parameter Setup
18 Discrete Inputs that can be Programmed for the Following Functions :

Pump Disable with HOA in OFF, or Pump Fault
External Alternator Selector Switch
All Pump Disable - for Connection to Phase Monitor
Limit Number of Pumps Called While on Emergency Power
Alternation by External Time Clock
Freeze Wet Well Level During Bubbler Tube Purge
Call Pump Last - for Connection to VFD/Bypass Logic
Float Switch Backup
A Variety of Telemetry Functions

Status of Discrete Inputs May Be Viewed From Front of Controller
Plug In style Connectors
Wetwell Flush Cycle Feature to reduce sludge build-up within the wetwell
Flow Calculator Feature for latest Inflow Rate, Average Daily Flow, and Pump Outflow Rate
Unused Output Relays programmable via SCADA for additional control uses

DOWNLOADS


		Instruction Manual for SC2000E Station Controllers (PDF, 2697KB)

		Product Data Sheets - SC2000E Station Controllers (PDF, 453KB)

		MPE SC2000 Station Controllers Specification (PDF, 92KB)

Item # SC2000-22E, 2 Analog Output and 2 Auxiliary Analog Input Station Controller

Underwriter's Laboratories (UL) File Number

Product Type

Number of Analog Outputs

Number of Auxiliary Analog Inputs

Maximum Input Power

Input Voltage

Input Voltage Tolerance (±)

Electromagnetic Interference (EMI) Line Filter

Input Power Transient Protection

Agency Approval

Ambient Operating Temperature

Level Display

Level Display Range (Decimal Point Position Selectable)

Display Indicator

Color

Aux. Analog Inputs

Discrete Inputs

Power for Discrete Inputs

Power for Analog Input

Regulated Direct Current (DC) Voltage Tolerance (±)

Isolated Analog Output Current

Maximum Analog Output Load

Isolated Analog Input Current (Transient Protected)

Isolated Auxiliary Analog Input Current (Transient Protected)

Auxiliary Analog Input Load (Transient Protected)

External Height

External Width

External Depth

Cut Out Height

Cut Out Width

Options

Category

Relay Current at 120 Volt Alternating Current (AC) Voltage